*apax di/o modules can use id number 0 ~ 31, while ai/o modules and counter modules can only use id numbers 0 ~ 15 apax-5522pe specifcations general ? certifcation ce, fcc class a dielectric strengh and impulse tests: iec60255-5:2000 emc immunity: electronic discharge: iec 61000-4-2:2001,level3 radiated rf immunity: iec 61000-4-3:2002, 10 v/m ieee c37.90.2-1995, 35 v/m fast transient, burst immunity: iec 61000-4-4:1995 + a1:2001, 4kv @ 2.5khz surge immunity: iec 61000-4-5:2001, 2kv line to line, 4kv line to earth conducted rf immunity: iec 61000-4-6:2004, 10 vrms magnetic field immunity: iec 61000-4-8:2001, 1000 a/m for 3 seconds, 100 a/m for 1 minute domf: iec 61000-4-10:2001, 30 a/m @ 100khz and 1 mhz emc emissions conducted emissions: en 55011: 2002, class a radiated emissions: en 55011: 2002, class a ? dimensions (w x h x d) 60 x 139 x 100 mm (without backplane) ? enclosure abs+pc ? weight 180 g ? connectors db-9 ? power consumption 2 w @ 5 v dc (typical) system hardware ? cpu intel xscale pxa270 520 mhz ? memory flash 32 m bytes, sdram 64 m bytes ? battery backup memory 256 kb fle system, 256 kb direct access ? real-time clock yes ? watchdog timer yes ? storage 1 x type ii compactflash card slot software ? os support linux kernel 2.6 rt, kw software on wince ? control software api library / multiprog kw linux based rtu controller i/o expansion ? connected i/o modules 32 (max.)* ? digital signals 768 (max.) ? analog signals 192 (max.) communication (ethernet) ? lan 2 x rj-45 port, 10/100 mbps communication (serial) ? medium 2 x isolated rs-232 environment ? operating temperature -20 ~ 70c (mounted vertically) ? storage temperature -40 ~ 85c ? relative humidity 5 ~ 95% (non-condensing) ordering information ? APAX-5522PELX iec 61850-3 compliant pac ? apax-5522pekw iec 61850-3 compliant pac, kw softlogic on wince accessories ? apax-5002l 2-slot backplane module ? apax-5350 apax power filter for apax pe modules ? iec 61850-3 and ieee-1613 certifed for substation automation application ? xscale pxa270 520 mhz processor ? wide temperature support (-20 ~ 70c) ? supports up to 32 apax i/o modules ? time-stamp function support ? linux os support ? 2 x lan ports support introduction iec 61850-3 standards specify a number of hardened characteristics that network products should meet to withstand the potenti ally electromagnetically harsh substation environment: such as immunity to electrical surge, electrostatic discharges and other phenomena that would cause non-hardened devices to fail. the apax-5000pe series modules are iec 61850-3 compliant and can be used in power & energy applications e.g. smart substation for good protection features. new rohs compliant 2002/95/ec *apax di/o modules can use id number 0 ~ 31, while ai/o modules and counter modules can only use id numbers 0 ~ 15 all product specifications are subject to change without notice last updated : 5-may-2015 din-rail ipcs features
|